Asko T754CT Operating Instructions Manual page 22

Installation instructions
3. Secure the anti-tip device using the screws
as shown in the picture.
4. Attach the plastic cups for mounting the
tumble dryer's front feet to the washing
machine's top cover. This is essential, as
only when the tumble dryer's feet are resting
in the plastic cups can you be sure that the
tumble dryer is correctly positioned on the
washing machine. Break off tab A on the cup
fitted on the right side and tab B on the cup
fitted on the left side. Then remove the paper
from the self-adhesive surface under the
plastic cups.
A
B
5. Fit the plastic cups so that the "tags" marked
with arrows are against the front edge or side
edge of the cover and press them firmly onto
the cover. Then break off the remaining tabs.
6. Push out the knock-out hole on the back
of the tumble dryer (you don't have to
completely remove the knockout, just fold
it up far enough for the stacking bracket to
fit inside the slot) using a hammer and a
screwdriver.
22
7. Push the tumble dryer in under the metal
brackets. At the same time keep the front
edge raised by 7/16" (10mm) to 7/8" (20mm) .
8. Lower the tumble dryer's front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Adjusting the feet
Screw the feet in or out so that the tumble dryer
is both stable and level.
Customer Care Center
1-800-898-1879
www.askona.com