Table of Contents
Advertisement
TO DISABLE OR ENABLE AUTO-
SYNCHRONIZATION
In Clock mode, press DOWN for 2 seconds to disable
the auto-synchronization. The unit will not respond to
radio signals until you reactivate the synchronization.
To enable auto-reception, press UP for 2 seconds.
SET OR CHANGE THE CLOCK
1.
Press SELECT to switch to the Clock Mode.
The time will flash.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
3.
Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting.
Press SELECT to confirm.
PS-L02_GB-final.p65
13
ALARM
When activated, the Melody Alarm starts quietly, then
gradually becomes louder. It shuts off after two minutes.
The LCD display lights up for the first 8 seconds.
SET ALARM
1.
Press SELECT several times until the Alarm area
flashes.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
3.
Select the hour, minute,
melody (1-7) and
volume level (Lo or Hi). Press UP or DOWN to
change the setting. Press SELECT to confirm.
4.
Press SELECT again when you are finished.
11
8/8/03, 12:17 PM
Advertisement
Table of Contents
