Using Your Remote Control, Continued; Two Stage Door Unlock; Activating The Trunk Release Feature; Turning On The Vehicle's Headlights - Code Alarm CA-135 Owner's Manual

Using Your Remote Control, continued

Two Stage Door Unlock

If this feature is enabled on your system, pressing the UNLOCK icon button one time on the remote
control will unlock only the driver's door. Press disarm again within 15 seconds to unlock the
remaining doors.

Activating the Trunk Release Feature

If this feature is enabled on your system, pressing and holding the TRUNK icon button on the remote
control for 2 seconds will open the vehicle's trunk or hatch. When using the 2-way confirming LED
remote control the TRUNK icon will flash 1 time and the the remote control will beep/vibrate 1 time.

Turning on the Vehicle's Headlights

If this feature is enabled on your system, pressing and holding the LOCK icon button on the remote
control for 2 seconds will turn on the vehicle's headlights for 20 seconds.

Activating Optional Channel 2

If this feature is enabled on your system, pressing and holding the LOCK icon button and the TRUNK
icon button on the remote control simultaneously will activate an optional feature. This feature can be
programmed for a wide range of functions like power window or sunroof automation, please consult
your installing dealer to determine functionality of your system.
Activating Optional Channel 3
If this feature is enabled on your system, pressing and holding the OPT button on the remote control
will activate an optional feature. This feature can be programmed for a wide range of functions like
power window or sunroof automation, please consult your installing dealer to determine functionality
of your system.
Activating Optional Channel 4
If this feature is enabled on your system, pressing and holding the LOCK icon button and the OPT
button on the remote control simultaneously will activate an optional feature. This feature can be
programmed for a wide range of functions like power window or sunroof automation, please consult
your installing dealer to determine functionality of your system.
Activating Optional Channel 5
If this feature is enabled on your system, pressing and holding the UNLOCK icon button and the OPT
button on the remote control simultaneously will activate an optional feature. This feature can be
programmed for a wide range of functions like power window or sunroof automation, please consult
your installing dealer to determine functionality of your system.

Using the Progressive Car Finder Feature

2-way LED Remote Control:
Press the LOCK icon button and the UNLOCK icon button on the remote control to locate your vehicle.
The system will sound 5 times at low volume increasing in volume each of 3 times the button is
pressed.
1-way Six Button Remote Control:
Press the icon button on the remote control to locate your vehicle. The system will sound 5 times at
*
low volume increasing in volume each of 3 times the button is pressed.
Using the Personal Protection Alarm (Panic)
2-way LED Remote Control:
Press and hold the LOCK icon button and the UNLOCK icon button on the remote control for 3
seconds to activate the personal protection alarm. The system will sound for 30 seconds. Pressing
any button on the remote control will turn the personal protection alarm off. When using the 2-way
confirming LED remote control the PANIC icon will flash and the remote control will beep/vibrate.
1-Way Six Button Remote Control:
Press and hold the
protection alarm. The system will sound for 30 seconds. Pressing any button on the remote control
will turn the personal protection alarm off.
4
* icon button on the remote control for 3 seconds to activate the personal