Date Change - TEC EM1-31076 Owner's Manual

13. OPERATING PROCEDURES
NOTES:
1. A store code can be printed in place of a 'packed on date' and 'sell by date' by changing the
initial settings #6-5 and #6-6.
To print a store code, select 'packed on date' or 'sell by date' as a print item using the above
procedure.
2. The print of "packed on time" with alphabetical code can be selected with the Initial setting
#6-6. (SL-9000N only)
3. Setting data will not be changed by turning the power off, changing the mode or calling a
PLU.
0
4. The key has no function.
5. Pressing the
6. The range of idle time=0 to 99 seconds. A setting '0' prohibits display of an auto
message.
7. Item 29 is operable only when the initial setting #1-5 is set to '0'.
8. Be sure to press the

13.10 DATE CHANGE

The date can be changed temporarily.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
Press:
Enter the new date.
(Ex. Dec. 18, 1994)
NOTE: The scale will check the details of the date input. An invalid date will result in an
error.
C
key allows you to return to the step of selecting the 'packed on date'.
key after the
FEED
DT/TM
1
Month
2
1
Day
8
9
Year
4
PRT
*
key when changing the label format.
PRT/*
DATE 1 2 1 8 9 4
13-15
13.9 SELECTING PRINT ITEM