Installation Procedure - TEC EM1-31076 Owner's Manual

7.

INSTALLATION PROCEDURE

7. INSTALLATION PROCEDURE
■ Scale installation on the wall or ceiling
The installation should be an authorized installing dealer.
Please contect your nearest TOSHIBA TEC representative.
Platter
■
1. Attach the two platter mount plates to the platter arm with the four D-4x8 screws.
Platter Mount Plate
2. Fit the notch of the platter arm on the joint nut of the scale.
Joint nut
Screw
7- 1
7. INSTALLATION PROCEDURE
Platter Arm
Platter Arm