Table of Contents
Advertisement
10. PROGRAMMING PROCEDURES
10.15 LON SYSTEM
Menu Page: 2
Item No.:
4
The SL-9000 scales which consists of a master, satellites, and a backup master are connected each
other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
ID# 1 is reserved for the master terminal.
ID# 2 is reserved for the backup master terminal or satellite terminal.
ID# 3 to 32 are for satellite terminals.
Setting numbers other than the above results in an error.
<MENU>
Page 2
ID#: 1
m
NOTES:
1. Before starting the above procedure, press the
2. When installing the backup master terminal, set the master scale's initial status of
#9-1 to 1.
3. Set ID # to all scales connected by LON cable.
4. When the display power is turned on, a satellite terminal is ready to receive data from
the master terminal.
5. After setting the ID #, turn the power switch OFF and ON again.
m
4
◇
IN-LINE
Set the number of
scales in the system.
<MENU>
PROG.
Page 2
Main
ESC.
<MENU>
CHANGE
ID #
PLU
OFF-LINE
DLL?
ENTER
key and enter IN-LINE mode.
10-24
ENTER
Yes
n
No
p
10.15 LON SYSTEM
Advertisement
Table of Contents
