Connection Terminals - Toshiba TLP-ET1E Owner's Manual

Preparations

Connection terminals

(1)
Name
(1) COMPUTER terminal
(2) Y, P /C , and P /C
B B R
(3) SERVICE terminal
(4) S-VIDEO terminal
(5) AUDIO terminal
(6) VIDEO terminal
(7) AV IN terminal*
Note
• Component video signals are abbreviated as Y/P
from a video device whose output signals are represented as Y/C
* Although the AV IN terminal is included in illustrations in this manual, the terminal exists only on the TLP-ET1B
and TLP-ET1E. TLP-ET1U is not equipped with the AV IN terminal.
The AV IN terminal automatically identifies the RGB and composite signals.
Check the setting on the connected device as well.
12
(6)
: Function
: Inputs RGB signals from a computer or other equipments.
terminals : Input component video signals (Y/P
R
: Leave this unconnected. Used for repair purposes.
: Inputs S-Video signals from a video device.
: Inputs audio signals from a computer or video device.
: Inputs video signals from a video device.
: Inputs audio and video signals from a video device. The AV IN terminal
cannot receive S-Video signals.
B
(2)
(5)
/P ) from a video device.
B R
/P in this manual. However, the projector supports signals
R
/C as well.
B R
(3)
(4)
(7)