Toshiba TLP-ET1E Owner's Manual page 33

Item
Auto setting Adjust items, such as the sampling phase,
depending on the type of input signal.
Press the OK button.
Phase Adjust with
Frequency Adjust with
patterns and flickering when many vertical
lines appear on the screen.
H-position Adjust the horizontal position of the picture
screen.
Move left
V-position Adjust the vertical position of the picture screen.
Move up
Clamp 1) Press the OK button.
2) Use
Clamp 1:
Adjust the position of the clamp pulse.
Clamp 2:
Adjust the width of the clamp pulse.
Shorter
Signal format Set the Y/P
1) Press the OK button.
2) Select one from the displayed list with
and
Auto:
Automatically identifies the type of input signal.
If this fails, select one from the following:
480i(525i)@60/480p(525p)@60/
576i(625i)@50/576p(625p)@50/
720p(750p)@60/720p(750p)@50/
1080i(1125i)@60/1152i(1250i)@50/
1035i(1125i)@60/1080i(1125i)@50
Video mode Set the VIDEO and S-VIDEO color system.
1) Press the OK button.
2) Select one from the displayed list with
and
Auto:
Automatically identifies the type of input signal.
If this fails, select one from the following:
NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43
Notes
• Items can be adjusted/set (marked with "Yes") or cannot (marked with "–") depending on each type of input.
• Pressing the EXIT button on the remote control dismisses the menu screen.
Description
and to minimize flicker.
and to minimize periodic
Move right
Move down
or to select Clamp 1 or 2.
Down Up
Longer
/P signal DTV format.
B R
, then press the OK button.
, then press the OK button.
Video S-video Y/P /P AV
B R
– – – –
– – Yes –
– – – –
– – – –
– – – –
– – – –
– – Yes –
Yes Yes – Yes
Computer
Yes
Yes
Yes
Yes
Yes
Yes
–
–
33