Connecting An Input Source Device; Connecting A Video Device - Toshiba TLP-ET1E Owner's Manual

Preparations

Connecting an input source device

Before connection
• Read the owner's manual of the device to connect to the projector.
• Turn off the power of both devices before connecting.

Connecting a video device

I Using the AV or S-Video cable
Note
• Use the AV cable or S-Video cable to connect the input device to this unit. When using the S-Video cable, also use an
audio cable such as the AV cable to connect the audio input from the video device to the AUDIO terminals on the unit.
I Using the SCART cable
* The TLP-ET1U cannot use the SCART cable for connection since it has no AV IN terminal.
(Yellow) (White) (Red)
AV cable
(supplied)
Red
To audio output(R)
White
To audio output(L)
Yellow
To video output
VCR
SCART cable*
(not supplied)
To SCART
terminal
VCR
S-Video cable
(not supplied)
To S-Video output
15