Names Of Each Part On The Control Panel And Remote Control; Names Of The Connection Terminals - Toshiba TLP-T50M Owner's Manual

Names of each part on the control panel and remote control

Control panel
CLASS 1 LED PRODUCT
(7) (8) (9) (10)
FAN TEMP LAMP ON
INPUT ON / STANDBY
(2) (1)
MENU
(6)
VOL. - VOL. +
(5)
AUTO
KEYSTONE AUTO SET
(3) (4)
Name : Main Function
(1) ON/STANDBY button : Turns the power on/off (standby)
(2) INPUT button : Selects input
(3) AUTO KEYSTONE button : Adjusts keystone (trapezoidal distortion)
(4) AUTO SET button : Sets up image and mode
(5) MENU button : Displays menus and makes selections
(6) Selection button : Menu selections and adjustments, etc.
(7) FAN indicator : Displays cooling fan mode
(8) TEMP indicator : Lights when internal temperature too high
(9) LAMP indicator : Displays lamp mode
(10) ON indicator : Displays whether power is on or off
(11) MUTE button : Cuts off the picture and sound temporarily
(12) FREEZE button : Pauses image
(13) RESIZE button : Enlarges picture size
(14) OFF button : Turns off enlarged picture display
(15) CALL button : Displays the information on the screen
Notes
• For the remainder of this manual, buttons are referred to as follows:
Selection button ; MENU button
• For further information of the mouse remote control supplied with the TLP-T50M, see the
Owner's Manual of the Mouse Remote Control.
Remote Control
Remote control transmitter
ON/
STANDBY
CALL
(15) (1)
KEYSTONE AUTO SET
(3) (4)
MUTE FREEZE
(12)
(11)
RESIZE
(13)
RESIZE
OFF
(14)
INPUT
(2)
(5)
- +
VOL. MENU VOL.
(6)
CT-90140
p.19
p.21
p.24
p.23
p.27
p.27
p.20 p.33
p.33
p.20
p.19
p.24
p.25
p.25
p.25
p.26
14

Names of the connection terminals

(6) (5) (4) (3) (2)
VIDEO
CONTROL AUDIO MONITOR
VIDEO S-VIDEO
(1) COMPUTER terminal
Input RGB signal from a computer or other source, or a component video signal (Y/P
P ) from video equipment.
R
(2) MONITOR terminal
Connect to a computer display, etc.
(3) S-VIDEO terminal
Input S video signals from video equipment.
(4) VIDEO terminal
Input video signals from video equipment.
(5) AUDIO terminal
Input audio signals from a computer or video equipment.
(6) CONTROL terminal
When operating the projector via a computer, connect this to the controlling computer's
RS-232C port. p.38
Note
• Although this owner's manual abbreviates component video signals as Y/P
product also supports signals from video equipment marked "Y/C
(1)
COMPUTER
( Y/P )
B /P R
/P , the
B R
/C ."
B R
15
/
B