Table of Contents
Advertisement
Screen Tab: Monitor
The top screen under the Monitor tab is a graphical power flow block diagram that acts as a mimic display
showing power flow through the UPS sections (Input, Output, Bypass, and Battery) and the UPS status
(on-line, backup, bypass, Shutdown). Additional information screens are available that display the de-
tailed status of the various parameters for the input, output, bypass, battery, dC bus, System Status, and
remote Communications.
the monitor tab illustration, next page, shows the screens available and how to navigate between them.
Mimic Display
in the mimic display of the monitor tab screen, the four UpS selection keys, input (IN), dC bus, (DC) output
(OUT), bypass (BYP), and battery (0) are connected by lines indicating power flow. A thick line indicates
power flowing, and thin line indicates no power flowing.
The Monitor display, below, shows the UPS in Shutdown Mode: Power is flowing to charge the battery, but
no power is going to the bypass or output.
Monitor Details
press the IN, BYP, OUT, DC, or BAT key on the mimic display to view the parameter details for that section
of the UpS.
The MONITOR TAB figure on the following page shows the relationship of the various data displays.
press the Home key,
Home
96%
100%
HOME
USR
Main
Monitor
IN
C&C
dVCoH
40
, to return to the opening monitor tab screen.
inV
12:35 pm
Settings
Records
BYP
DC
OUT
BAT
D&E
ASyn
on-line
MIMIC DISPLAY STATUS
INDICATOR
MIMIC DISPLAY
96%
100%
inV
12:35 pm
96%
100%
HOME
USR
HOME
USR
Main
Monitor
Settings
Records
Main
Monitor
BYP
IN
DC
OUT
IN
BAT
C&C
D&E
C&C
on-line
dVCoH
ON-LINE MODE
BYPASS MODE
96%
100%
inV
12:35 pm
96%
100%
HOME
USR
HOME
USR
Main
Monitor
Settings
Records
Main
Monitor
BYP
IN
DC
OUT
IN
BAT
C&C
D&E
C&C
ASyn
backup
dVCoH
dVCoH
BACKUP MODE
OUTPUT SHUTDOWN
MODE
1600Xp Series installation and operation manual
byp
12:35 pm
Settings
Records
BYP
DC
OUT
BAT
D&E
ASyn
bypass
wrn
12:35 pm
Settings
Records
BYP
DC
OUT
BAT
D&E
ASyn
Shutdown
Advertisement
Table of Contents
