Table of Contents
Advertisement
LCD Touchscreen Layout
the touchscreen serves as input and display. touch the active portion of the display to execute a com-
mand.
Startup Display
the default opening screen for the UpS is the Main screen. the operator can begin operating the UpS
immediately by pressing the rUn key.
only the Main and Settings tab screens allow operator input. the Monitor and Records display screens
are read-only. no data can be entered in these screens
From the Main screen, the UpS can be placed on-line by pressing rUn, or placed in bypass mode by
pressing Stop.
the Settings screen allows modification of the UPS operating parameters.
At the top of the display are four status indicators: % load, battery information, UpS System Status, and
System time.
Security level: USr - User
Adm - Administrator
% Fullload
Home page
Function tabs
LCD TOUCHSCREEN
DISPLAY LAYOUT
Fault Code
At the top left of the display are a bank of four touch-sensitive keys:
Home - pressing HOME key returns the display to the top menu of the currently selected tab.
Security level - pressing the Security Level key activates the log-in security screen.
(Speaker) - pressing the Speaker key will disable/enable the audible alarm.
touchscreen lock - locks touchscreen except for this key.
1600Xp Series installation and operation manual
Speaker
battery information
on/off
96%
100%
HOME
USR
Main
Monitor
1600
UPS Serial Number
20080112345
UPS Typeform
UXpb2b100C6
dVCoH
warning Code
touchscreen lock
UpS System Status
inV
12:35 pm
Settings
Records
XP
On-Line UPS
UpS Controls
RUN
STOP
ASyn
on-line
12-Hour
Clock
key Status indicatior
(UpS is in on-line mode)
rUn key
key Status indicatior
(UpS is not in bypass
mode)
Stop key
UpS
System
mode
33
Advertisement
Table of Contents
