Kenwood NX-5200K3 User Manual page 42

Selecting a Number from the List
o
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
2
Press the [J] and [K] keys to select your desired list number.
3
Press the PTT switch to make the call.
MAKING A TELEPHONE CALL (LTR TRUNKING)
Manual Dialing
o
1
Select the desired zone and telephone group ID.
2
Press the PTT switch to start the call.
3
Enter the desired number using the DTMF keypad.
Selecting a Number from the List
o
1
Select the desired zone and telephone group ID.
2
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
3
Press the [J] and [K] keys to select your desired list number.
4
Press the PTT switch to make the call.
RECEIVING A TELEPHONE CALL
1
When a call is received, "Phone Call" will appear on the display.
2
Press and hold the PTT switch to speak, and release it to receive.
Only one person can speak at a time.
●
3
To end the call, press the key programmed as [Clear].
MAKING A STATUS CALL
1
Select your desired zone and channel.
2
Press the key programmed as [Status] to enter Status mode.
Alternatively, press the key programmed as [Menu] to enter Status mode using the Menu
Mode.
3
Press the [J] and [K] keys to select the status ID you want to transmit.
4
Press the PTT switch or the [ ] key to initiate the Status call.
After the status call has been successfully received by the called unit, "Complete"
●
appears on the display.
42