Denon PMA-60 Owner's Manual page 61

Contents Connections
o Bluetooth cannot be played back
Symptom
Bluetooth devices cannot
0
be connected to this unit.
0
0
0
0
The sound is cut off.
0
0
0
0
o NFC connection fails
Symptom
NFC connection fails.
0
0
Front panel Display
Playback
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner's Manual of the
Bluetooth device to enable the Bluetooth function.
Bring the Bluetooth device near to this unit.
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Turn the power of the Bluetooth device off and on again, and then try again.
The Bluetooth function is off. Press Bluetooth button, activate the Bluetooth function and connect again.
Bring the Bluetooth device near to this unit.
Remove obstructions between the Bluetooth device and this unit.
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
devices and other Bluetooth devices.
Reconnect the Bluetooth device.
Check that the Bluetooth device has the NFC function.
Touch the N-Mark (Q) on this unit, checking the location of the NFC antenna on the Bluetooth device.
Touch surely until the Bluetooth device responds.
Rear panel
Settings
Cause / Solution
Cause / Solution
61
Remote
Tips Appendix
Page
Page
Index
－
－
－
－
52
－
－
－
－
－
46