Denon PMA-60 Owner's Manual page 38

Contents Connections
G Select the "PMA-60" format.
It is normally recommended to set the format to "384000.0 Hz" and
0
"2ch-32 bit Interger".
PMA-60
PMA-60
u
H Quit Audio MIDI Setup.
Front panel Display
Playback Settings
o Playback
Install the desired player software on your computer beforehand.
Use the rear panel USB-DAC port to connect this unit to a
computer. (v p. 22)
1
Press q to switch the input source to "USB-DAC".
Start playback on the computer's player software.
The digital audio signal that is being input is shown as follows in the
display.
38
Rear panel
Tips
or
(xxx is the sampling frequency.)
If the sampling frequency cannot be detected, "Unlocked" will be
0
displayed.
"Unsupported" is displayed when audio signals that are not
0
supported by this unit are input.
Remote Index
Appendix