Denon PMA-60 Owner's Manual page 37

Contents Connections
o Audio Device Settings (Mac OS only)
A With the unit power off, connect the unit and Mac using a USB cable
(supplied).
For the connection procedure, refer to the "Connecting a PC or Mac"
0
section. (v p. 22)
B Press X.
C Press q to switch the input source to "USB-DAC".
D Move the cursor to "Go" on the computer screen, and then click
"Utilities".
The utility list is displayed.
0
E Double-click "Audio MIDI Setup".
The "Audio Devices" window is displayed.
0
F Check that "Use this device for sound output" is checked in "PMA-60".
If a different device is checked, select and "Secondary click" on
0
"PMA-60", and then select "Use this device for sound output".
Front panel Display
Playback Settings
37
Rear panel
Tips
PMA-60
PMA-60
y
Remote Index
Appendix