Introduction; Manual Purpose And Contents; Target; Identification Data - Clarke MA10 12E Instructions For Use Manual

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components
shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all
necessary information to use the machine properly, in a safe
and autonomous way. It contains information about technical
data, safety, operation, storage, maintenance, spare parts and
disposal.
Before performing any procedure on the machine, read this
Manual carefully. Contact Clarke in case of doubts concerning
the interpretation of the instructions and for any further
information.
Keep the manual in the appropriate envelope for future use or in
case of resale of the equipment.

TARGET

This Manual is intended for operators and technicians qualified
to perform the machine maintenance.
Users must not perform procedures reserved for qualified
technicians. Clarke will not be answerable for damages coming
from the non-observance of this prohibition.

IDENTIFICATION DATA

The machine serial number and model name are marked on the
plate (5).
Product number and year of production are marked on the same
plate.
This information is useful when requiring machine spare parts.
Use the following table to write down the machine identification
data.
MACHINE model ....................................................................
PRODUCT code .....................................................................
MACHINE serial number ........................................................

OTHER REFERENCE MANUALS

– Service Manual (that can be consulted at Clarke Service
Centers)
– Spare Parts List (supplied with the machine)

SPARE PARTS AND MAINTENANCE

Any repair procedure must be performed by qualified personnel
or by Clarke Service Centers.
Only original spare parts and accessories must be used.
Contact Clarke for service or to order spare parts and
accessories, specifying the machine model, product code and
serial number.

CHANGES AND IMPROVEMENTS

Clarke constantly improves its products and reserves the right
to make changes and improvements at its discretion without
being obliged to apply such benefits to the machines that were
previously sold.
Any change and/or addition of accessory must be approved and
performed by Clarke.
2
INSTRUCTIONS FOR USE
MA10 12E - 107408647

MACHINE FUNCTIONS

This scrubber-dryer has been designed and built for commercial
use and for cleaning (scrubbing and drying) smooth and
compact floors.
The scrubber-dryer can be used on carpet when carpet
accessories are installed.

CONVENTIONS

Forward, backward, front, rear, left or right are intended with
reference to the operator's position when in use.

UNPACKING/DELIVERY

When the machine is delivered, check that the packing and the
machine were not damaged during transportation.
In case of visible damages, keep the packing and have
it checked by the carrier that delivered it. Call the carrier
immediately to fill in a damage claim.
CAUTION!
After unpacking, carefully assemble the machine
according to the instructions sheet inside the
packaging.
Please check that the following items have been supplied with
the machine:
– Technical documents:
• Scrubber-dryer Instructions for use Manual
• Scrubber-dryer Spare Parts List
WARNING!
The Products sold with this Manual contain or
may contain chemicals that are known to certain
governments (such as the State of California,
as identified in its Proposition 65 Regulatory
Warning Law) to cause cancer, birth defects or
other reproductive harm. In certain locations
(including the State of California) purchasers
of these Products that place them in service at
an employment job site or a publicly accessible
space are required by regulation to make certain
notices, warnings or disclosures regarding the
chemicals that are or may be contained in the
Products at or about such work sites. It is the
purchaser's responsibility to know the content
of, and to comply with, any laws and regulations
relating to the use of these Products in such
environments. The Manufacturer disclaims
any responsibility to advise purchasers of any
specific requirements that may be applicable to
the use of the Products in such environments.

SAFETY

The following symbols indicate potentially dangerous situations.
Always read this information carefully and take all necessary
precautions to safeguard people and property.
The operator's cooperation is essential in order to prevent
injury. No accident prevention program is effective without the
total cooperation of the person responsible for the machine
operation. Most of the accidents are caused by failure to comply
with the simplest rules for exercising prudence.

VISIBLE SYMBOLS ON THE MACHINE

WARNING!
2%
Do not use the machine on slopes with
a gradient exceeding the specification.
11/2015