Impex SM-5276 Owner's Manual page 24

Lower Cable assembly instruction Step-14
A.) Insert the tip of the 152" Lower Cable (#44) through the opening on Foot Plate (#32) to the
opening on bottom of Middle Vertical Frame (#9).
B.) Attach a Pulley (#62) to the opening. Secure it with one M10 x 2 ½" Allen Bolt (#95), two Ø 1" x ½"
Pulley Bushings (#57), and one M10 Aircraft Nut (#110).
C.) Draw the Cable to the Angled Floating Pulley Bracket (#52) previously installed in Step-11.
D.) Attach a Pulley to the Bracket. Secure it with one M10 x 2" Allen Bolt (#94), two Ø ¾" Washers
(#107), two Cable Retainers (#78), and one M10 Aircraft Nut (#110).
E.) Draw the Cable around the Pulley and then downward to the first open bracket on the Lower
Pulley Frame (#16).
F.) Attach a Pulley to the bracket. Secure it with one M10 x 2" Allen Bolt (#94), two Ø ¾" Washers
(#107), one Cable Retainer (#78), and one M10 Aircraft Nut (#110).
G.) Draw the Cable under Pulley and through the next open bracket to the third open bracket. Attach
a Pulley to the bracket. Secure it with one M10 x 2" Allen Bolt (#94), two Ø ¾" Washers (#107),
one Cable Retainer (#78), and one M10 Aircraft Nut (#110).
H.) Draw the Cable around the Pulley and then upward to the Double Floating Pulley Bracket
previously installed in Step-13.
I.) Attach a Pulley to the Bracket. Secure it with one M10 x 2" Allen Bolt (#94), two Ø ¾" Washers
(#107), two Cable Retainers (#78), and one M10 Aircraft Nut (#110).
J.) Draw the Cable around the Pulley then downward to the open bracket on Lower Pulley Frame.
K.) Attach a Pulley to the bracket. Secure it with one M10 x 2" Allen Bolt (#94), two Ø ¾" Washers
(#107), one Cable Retainer (#78), and one M10 Aircraft Nut (#110).
L.) Draw the Cable around the Pulley then upward to the Single Floating Pulley Bracket (#34)
previously installed in Step-12A. Secure the Cable to the Bracket with one M10 x 1" Allen Bolt
(#91), two Ø ¾" Washers (#107), and one M10 Aircraft Nut (#110).
M.) Move the lower Pulley position on Double Floating Pulley Bracket will adjust the tension of the
whole Cable System. Move up the Pulley will increase the tension. Move down the Pulley will
loosen the tension.
N.) Attach the Shiver Bar (#54) to the Lower Cable with one 15-link Chain (#72) and two Hooks (#72).
Replace the Shiver Bar with Ankle Strap (#75) ot Triceps Rope (#53) for various exercises.
©IMPEX INC.
23
www.marcypro.com