Impex SM-5276 Owner's Manual page 12

Butterfly Cable assembly instruction Step-11
A.) Attach one end of 113" Butterfly Cable (#45) to the clip on Right Butterfly (#13). Draw the Cable to
the right Swivel Pulley Bracket (#15).
B.) Attach a Pulley (#62) and two Cable Retainers (#78) to the Bracket. Secure them with one M10 x
2" Allen Bolt (#94), two Ø ¾" Washer s (#107), and one M10 Aircraft Nut (#110).
C.) Draw the Cable around the Pulley then downward. Attach an Angled Floating Pulley Bracket (#52)
to the Cable. Repeat Procedure B above to install a Pulley. Let the Bracket hanging for now.
D.) Draw the Cable around the Pulley then upward to the left Swivel Pulley Bracket. Repeat
Procedure B above to install a Pulley to the Bracket.
E.) Draw the Cable around the Pulley then clip to the Left Butterfly (#12).
©IMPEX INC.
11
www.marcypro.com