Impex SM-5276 Owner's Manual page 21

Sliding Weight Post Cable assembly instruction Step-13
A.) Attach one end of the 97" Sliding Weight Post Cable (#46) to the triangular bracket on the Sliding
Weight post (#23). Secure it with one M10 x ¾" Allen Bolt (#90), two Ø ¾" Washers (#107), and
one M10 Aircraft Nut (#110).
B.) Draw the Cable upward to the opening on the Weight Glide Post (#17).
C.) Attach a Pulley (#62) to the opening. Secure it with one M10 x 2 ½" Allen Bolt (#95), two Ø 1" x ½"
Pulley Bushings (#57), and one M10 Aircraft Nut (#110).
D.) Draw the Cable around the Pulley and then downward.
E.) Attach a Pulley to top holes on the two Double Floating Pulley Brackets (#33). Secure the Pulley
with one M10 x 2" Allen Bolt (#94), two Cable Retainers (#78), two Ø ¾" Washers (#107), and one
M10 Aircraft Nut (#110).
F.) Draw the Cable around the Pulley and upward to the opening under the Rear Upper Frame (#18).
G.) Secure the end of the Cable to the opening with one M10 x 2 ⅜" Allen Bolt (#118), two Ø ¾"
Washers (#107), and one M10 Aircraft Nut (#110).
©IMPEX INC.
20
www.marcypro.com