Wireless Lan Connection Problems - Oki ES5432 Advanced Manual

Wireless LAN Connection Problems

• Common to Windows and Mac OS X
Cause
The network connection setting is • [Wireless(Infrastructure)] and
[Wireless(AP Mode)] cannot be
incorrect.
enabled at the same time.
• To connect using
[Wireless(Infrastructure)], set
[Wireless(AP Mode)] to [Disable],
and then set
[Wireless(Infrastructure)] to
[Enable].
• To connect using [Wireless(AP
Mode)], set
[Wireless(Infrastructure)] to
[Disable], and then set
[Wireless(AP Mode)] to [Enable].
[Wireless(Infrastructure)] Not • Check that the wireless access
point power is switched on.
connected to a wireless access point.
• Check the wireless access point
(If wireless LAN module is fitted)
settings, and then try the manual
settings or automatic settings.
• Restart the wireless LAN function.
• Press the
operator panel to select [Setting] >
[Admin Setup] > [Network Menu] >
[Network Setup] > [Wireless
(Infrastructure) Setting], and then
select [Wireless reconnection].
• Install this machine in a place with
a good view and near a wireless
access point. (We suggest that the
distance between the machine and
the access point be 30 m or less.)
If there is metal, aluminum sash, or
a reinforced concrete wall between
the machine and wireless access
points, connections may be harder
to be established.
Do not place any electric
appliances that emit weak radio
waves (such as microwaves or
digital cordless telephones) close to
the machine.
[Wireless(AP Mode)] No wireless • Make sure that [Wireless(AP
Mode)] on the machine is set to
devices (computers, tablets,
[Enable].
smartphones) are connected.
• Confirm the SSID/password for the
machine and try Manual Setup.
• Make a setting in a location near
the machine with good visibility.
• Up to four devices can be
connected to the machine via the
wireless LAN (AP mode). The fifth
device will be rejected. Disconnect
at least one device and try again.
Solution Reference
Connecting to a Wireless LAN
(Only When the Wireless LAN
Module is Mounted) (User's
Manual)
Connecting to a Wireless LAN
(Only When the Wireless LAN
Module is Mounted) (User's
Manual)
button on the
Connecting to a Wireless LAN
(Only When the Wireless LAN
Module is Mounted) (User's
Manual)
• For Windows
Cause
The IP address is incorrect. • Check that the same IP address is
• Check that the IP address is not
• Check that the correct IP address,
• If using OKI LPR Utility, check the
All pages are not printed. If you are using the WSD port,
change it to the standard TCP/IP
port.
- 86 -
Solution Reference
OKI LPR Utility
set for the machine and the
machine's port setting on the
computer.
duplicated by another device.
subnet mask, and gateway address
are set.
IP address setting with OKI LPR
Utility.
-
4. Troubleshooting