Oki ES5432 Advanced Manual page 119

Item Factory default setting
WINS Server (Primary) 0.0.0.0
WINS Server (Secondary) 0.0.0.0
Proxy Disable
Proxy Server (NULL)
Proxy Server Port No. 8080
Proxy User ID (NULL)
Proxy Password (NULL)
Web Enable
Telnet Disable
FTP Disable
IPSec Disable
SNMP Enable
Network Scale Normal
Description
Sets the name or the IP address for the
WINS server.
This item is displayed when TCP/IP protocol
is enabled.
Sets the name or the IP address for the
WINS server.
This item is displayed when TCP/IP protocol
is enabled.
Sets whether to use proxy.
Sets the name or IP address of the proxy
server. You can enter up to 15 characters.
Sets the port number of the proxy server.
Sets the user ID to connect to the proxy
server.
Sets the password to connect to the proxy
server.
Sets whether to enable access from a Web
browser.
This item is displayed when TCP/IP protocol
is enabled.
Sets whether to enable access from the
Telnet.
This item is displayed when TCP/IP protocol
is enabled.
Sets whether to enable access with FTP.
This item is displayed when TCP/IP protocol
is enabled.
This item is displayed only if IPSec is set to
valid. This item can be changed to disable
only.
This setting can be enabled only on the web
page.
Sets whether to enable access from SNMP.
This item is displayed when NetWare or TCP/
IP protocol is enabled.
[Normal]: The machine operates effectively
even if connected to a HUB with the
spanning tree function. However, the
machine takes longer to start up if it is
connected to a small LAN that consists of two
or three computers.
[Small]: This setting covers a small LAN that
consists of two or three computers to a large
LAN, but the machine may not operate
efficiently if it is connected to a HUB with the
spanning tree function.
- 119 -
Item Factory default setting
Gigabit Network Disable
HUB Link Setting Auto
• Wireless(Infrastructure) Setting (If wireless LAN module fitted)
Item
Wireless(Infrastructure)
Network Setting IP Address Set Auto
IPv4 Address
Subnet Mask
Gateway
Address
DHCPv6
Automatic Setup (WPS) WPS-PBC
WPS-PIN
Wireless A list of access point name found
Network in the search
Selection
Manual Setup SSID
Security
WEP Key
WPA
Encryption
Type
WPA Pre-
shared Key
Wireless Reconnection
5. Operating Management/ Specifications
Description
Sets whether to enable access with Gigabit
Ethernet.
Sets the hub linking method. Normally, select
[Auto Negotiate].
Factory Description
default
setting
Disable Sets whether to enable
Wireless(Infrastructure).
Sets the method of assigning an IP address.
192.168.101.10 Sets an IP address.
0 This item is displayed when TCP/IP protocol
is enabled.
255.255.255.0 Sets a subnet mask.
This item is displayed when TCP/IP protocol
is enabled.
0.0.0.0 Sets a gateway address.
This item is displayed when TCP/IP protocol
is enabled.
Disable Specify whether to enable DHCP when using
IPv6.
- WPS-PBC is executed.
- WPS-PIN is executed.
- Displays a list of wireless LAN access points'
names that are found in a search.
(NULL) Enter an SSID.
Disable Selects the security of the wireless LAN
function.
"WPA/WPA2-EAP" and "WPA2-EAP" can be
set only on the Web.
(NULL) Displays if [Security] is set to [WEP].
Enter the WEP key.
AES Select a WPA2-PSK encryption type.
Displays if [WPA/WPA2-PSK] or [WPA2-PSK]
is selected for [Security].
(NULL) Enter the Pre-shared Key.
Displays if [WPA/WPA2-PSK] or [WPA2-PSK]
is selected for [Security].
- Wireless(Infrastructure) reconnection is
executed.