Oki ES5432 Advanced Manual page 115

• Hex Dump
Item Factory
default
setting
Hex Dump OFF
Color Menu
Item
Density Control
Adjust Density
Color Tuning / Print Pattern
Cyan Tuning Cyan Highlight
Cyan Mid-Tone
Cyan Dark
Magenta Tuning Magenta Highlight
Magenta Mid-Tone
Magenta Dark
Yellow Tuning Yellow Highlight
Yellow Mid-Tone
Yellow Dark
Black Tuning Black Highlight
Black Mid-Tone
Black Dark
Density Cyan
Magenta
Yellow
Black
Adjust Registration
Ink Simulation
Description
Prints out the data received from the host computer in hex. To
finish printing, turn the machine off.
Factory default setting Description
Auto Select "Auto" or "Manual"
for adjusting density.
- Adjusting density is
performed right after this
menu is selected.
- A test page is printed for
checking the adjusting value
to be entered for any other
C/M/Y/K Tuning menus.
0 Adjust the value for
Highlight / Mid-tone / Dark of
0
each color within a range of
0
-3 to +3.
0
+ : Adjusted to be darker.
- : Adjusted to be lighter.
0
0
0
0
0
0
0
0
0 Adjust the total density of
each color within a range of
0
-3 to +3.
0
+ : Adjusted to be darker.
0
- : Adjusted to be lighter.
Color registration
adjustment is performed.
OFF Sets the ink simulation. This
setting is enabled only for
PS language jobs.
Item
UCR
CMY100% Density
CMYK Conversion
System Configuration Menu
Item
Personality Auto
Alarm Release Manual
Auto Continue OFF
Low Toner Continue
Error Report OFF
- 115 -
5. Operating Management/ Specifications
Factory default setting
Low Adjusts the level of under
color removal.
Disable Selects whether to use
halftone for C, M, Y 100%
density.
ON Selects whether to use
simple (quick) mode when
performing CMYK
Conversion.
This menu setting is
disabled if using the ink
simulation function.
Factory default setting Description
Selects the emulation mode. If auto is
set, the correct emulation is
automatically selected every time a
print job is received.
If [Manual] is set, non-critical
warnings, such as requests for a
different paper size, can be cleared by
pressing [RESET]. If [Auto] is set, the
warnings are cleared when the print
job resumes.
Sets whether the machine
automatically recovers from a memory
overflow.
Sets printer operation when Toner
Low is detected. In [Continue], the
printer can continue printing while
remaining ON-LINE. In [Stop], it
becomes OFF-LINE.
Sets whether to print error details if
PostScript, PCL6, or XPS errors
occur.
Description