Table of Contents
Advertisement
Setup Details
When the firmware is successfully downloaded (see
communicate to the LaunchPad™. Communication to the BoosterPack™ requires the use of a different
COM port than the one used for programming. The correct COM port for communication can be chosen
when all the steps in
4.2.2
Using the UniFlash Tool to Program the LaunchPad™
The UniFlash program can be accessed via the
the first time the TI cloud agent must be installed. Follow all instructions by downloading and installing the
correct cloud version for the operating system being used.
4.2.2.1
Flashing the Firmware
When the UniFlash program is accessed, either by cloud or download, start the process by first plugging
in the LaunchPad™ to the XDS110 programming connector at the top of the LaunchPad™. A green LED
lights up indicating that power is available and the cloud agent driver recognizes and is installing the
appropriate drivers for the LaunchPad™. For any issues with the installation or operation of the UniFlash
program, click on the Help icon in the UniFlash menu bar.
1. In the UniFlash program, select the MSP-EXP432E401Y LaunchPad™ from the drop down list as
illustrated in
Figure 11
12
BOOSTXL-ADS1119 BoosterPack™ User's Guide
Section 4
are complete.
Figure 10. Programming Successful
to start a New Configuration.
Copyright © 2018, Texas Instruments Incorporated
Figure
10), the GUI software should now be able to
cloud
or by download. When using the cloud version for
www.ti.com
SBAU322 – August 2018
Submit Documentation Feedback
Advertisement
Table of Contents
