Texas Instruments BoosterPack BOOSTXL-ADS1119 User Manual page 5

www.ti.com
From the File drop-down menu select Program Device from the menu options as illustrated in
the GUI detects the LaunchPad™, the firmware is automatically programmed into the LaunchPad™.
When the firmware program is successfully downloaded (see
communicate with the LaunchPad™.
2.2.2.2 Firmware Download Using the UniFlash Software
An alternate method for downloading the firmware is by using the UniFlash programming software. This
tool is useful in case there is an issue using the Program Device option in the GUI software.
2.2.2.2.1 Start the UniFlash Program and Choose the Correct LaunchPad™
Start the UniFlash program and begin a New Configuration
EXP432E401Y.
The connection type is automatically chosen based on the LaunchPad™ being used. Verify that the Texas
Instruments XDS110 USB Debug Probe is selected and press Start.
2.2.2.2.2 Choose the Firmware File and Flash the LaunchPad™
The firmware file is located in the folder Program Files (x86)\Texas Instruments\ADS1119\firmware. Use
the Browse button to browse to folder containing the firmware file. The firmware file can also be dragged
and dropped into the browse window provided in UniFlash.
When the desired firmware is selected, use the Load Image button to load the firmware into the
LaunchPad™.
Verify that the firmware installed successfully by checking the Console portion of the UniFlash tool at the
bottom of the GUI window.
SBAU322 – August 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
Figure 10), the GUI software can now
(Figure 11) and select the LaunchPad™ MSP-
BOOSTXL-ADS1119 BoosterPack™ User's Guide
Quick Start
Figure 9. If
5