Table of Contents
Advertisement
HKCU1001 (optional)
General
Power supply
2.5 W
Operating temperature –10°C to +40°C (14°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions (w/h/d)
EN-A board: Approx. 19 × 110 × 226 mm
(3/4 × 4 3/8 × 8 7/8 inches)
VDA-A board: Approx. 19 × 98 × 159 mm
(3/4 × 3 7/8 × 6 1/4 inches)
Mass
EN-A board: Approx. 0.22 kg (7.8 oz)
VDA-A board: Approx. 0.10 kg (3.5 oz)
Output connectors
VDA-A board
VBS
BNC-type (2), 1.0 Vp-p, 75 ohms, VBS
PIX OUT
BNC-type (1), VBS/R/G/B (VBS 1.0 Vp-p,
75 ohms)
WF OUT
BNC-type (1), VBS/R/G/B/SEQ (VBS
1.0 Vp-p, 75 ohms)
Supplied accessories
4-pin connector (1)
Design and specifications are subject to change without
notice.
HKCU1003 (optional)
General
Power supply
3.6 W
Operating temperature –10°C to +40°C (14°F to 104°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions (w/h/d)
EN-B board: Approx. 19 × 110 × 226 mm
(3/4 × 4 3/8 × 8 7/8 inches)
VDA-A/B/C board: Approx. 19 × 98 × 159
mm (3/4 × 3 7/8 × 6 1/4 inches)
Mass
EN-B board: Approx. 0.22 kg
VDA-A/B/C board: Approx. 0.10 kg
Output connectors
VDA-A board
VBS
BNC-type (2), 1.0 Vp-p, 75 ohms, VBS
PIX OUT
BNC-type (1), VBS/R/G/B (VBS 1.0 Vp-p,
75 ohms)
WF OUT
BNC-type (1), VBS/R/G/B/SEQ (VBS
1.0 Vp-p, 75 ohms)
VDA-B board
FRAME REF IN
BNC-type (1)
HD: SMPTE 274M, tri-level sync input,
0.6 Vp-p, 75 ohms
SD: Black burst input, 0.286 Vp-p, 75 ohms
FRAME REF OUT
BNC-type (1)
Loop-through output or frame sync pulse
output, 0.3 Vp-p, 75 ohms, switchable
PIX OUT
BNC-type (1), VBS/R/G/B (VBS 1.0 Vp-p,
75 ohms)
44
Specifications
WF OUT
BNC-type (1), VBS/R/G/B/SEQ (VBS
1.0 Vp-p, 75 ohms)
VDA-C board
VBS
BNC-type (1), 1.0 Vp-p, 75 ohms, VBS
R/R-Y, G/Y, B/B-Y
BNC-type (3)
• RGB video R/G/B (100% white):
0.7 Vp-p, 75 ohms
• Component video
Y (100% white): 0.714 Vp-p
R-Y/B-Y (75% color bar): 0.756 Vp-p,
75 ohms
Supplied accessories
4-pin connector (1)
Design and specifications are subject to change without
notice.
Notes
• Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY
KIND MADE BY USERS OF THIS UNIT OR MADE BY
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Advertisement
Table of Contents
