Sony HDCU2580 Operation Manual page 36

CCU
CONFIGURATION
Page name
Page No.
<PROMPT/TRUNK 1>
C10
<PROMPT/TRUNK 2>
C11
<VIDEO SETUP>
C12
<VIDEO ADJUST 1>
C13
(Available when an
HKCU1001 or HKCU1003
board is installed)
<VIDEO ADJUST 2>
C14
(Available when two
HKCU1001 or HKCU1003
boards are installed)
(Available when yet
another VDA board from
the HKCU1003 is installed
to the option slot)
36
Setup Menu
Item Settings
PROMPTER CH 1CH, 2CH
TRUNK LINE
CH 1CH, 2CH
IF 232C, 422A
RATE (38Kbps), (19Kbps), (75Kbps),
(150Kbps)
AUX REMOTE DISABLE, ENABLE
HD PROMPTER (ENABLE), (DISABLE)
FRAME SYNC OFF, ON, (ON)
HD TRUNK (ENABLE), (DISABLE)
SETUP ON, OFF, ---
SD BLK CLP OFF, ON
Q FILTER WD, NA
G/Y SYNC OFF, ON
VCS RELAY OFF, ON
VBS
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
PIX
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
WFM
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
VBS
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
PIX
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
WFM
LEVEL –99 to 99, 0
CHROMA –99 to 99, 0
G/Y LEVEL –99 to 99, 0
B/B-Y LEVEL –99 to 99, 0
R/R-Y LEVEL –99 to 99, 0
Description
Sets the number of prompter lines. (HDCU2580 is
locked to 1CH.)
Sets the number of channels to be used.
Sets the communication line mode.
Displays the TRUNK line. (Display only)
Sets whether or not AUX REMOTE is used.
(HDCU2080 only)
Displays "ENABLE" or "DISABLE" for HD
PROMPTER.
Turns the frame sync function ON/OFF.
Displays "ENABLE" or "DISABLE" for HD TRUNK.
ON: Adds a setup signal to VBS and SD YCD
component signal Ych-SYNC.
OFF: No setup signal is added.
---: Displayed when the format is PAL. (Display only)
Y signals from SD SDI output that are less than 0%
are clipped at 0%.
Sets the Q filter bandwidth. (Displayed only when
HKCU1001 or HKCU1003 is installed.)
Sets the R/G/B component signal's G ch-SYNC to
on/off. (Displayed only when HKCU1001 or
HKCU1003 is installed.)
Sets the PIX/WFM connector output. (Displayed only
when HKCU1001 or HKCU1003 is installed.)
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the VBS output video level.
Adjusts the PIX output video level.
Adjusts the WFM output video level.
Adjusts the G/Y output video level.
Adjusts the B/B-Y output video level.
Adjusts the R/R-Y output video level.