Sony HDCU2580 Operation Manual page 32

SYSTEM OPERATION
Page name
Page No.
<RETURN FORMAT>
S06
<RETURN SETUP>
S07
<CCU VIDEO>
S08
<3D SETTINGS>
S09
32
Setup Menu
Item Settings
RET1 1080/50I (PsF), 625/50I (PsF), PAL
SQUEEZE, EDGE CROP, LETTER
RET2
BOX,
RET3
16:9, 15:9, 14:9, 13:9
RET4
AUTO SCAN Execute via EXEC.
LINK TO MAIN MANUAL/AUTO
FRAME SYNCHRO OFF, ON
RETURN BUFFER NORMAL, EXTEND
SD-RETURN
MATRIX OFF, ON
LB LINE 360, 364
ASPECT MANUAL, AUTO
RETURN-TO-RETURN
MODE NORMAL, SMOOTH
VBS-CHROMA OFF, ON
MONO-COLOR OFF, ON
PHASE 0 to 358, 0
SATURATION –99 to 99, 0
3D MODE OFF, ON
3D OUTPUT 3D MONITOR, RIGHT ONLY,
LEFT ONLY
3D MONITOR SPLIT SCREEN, SIDE BY SIDE,
ANAGLYPH, 50% MIX,
DIFFERENCE, DIFF Y ONLY,
MIRROR, CROP SPLIT, V SPLIT,
CHECKER BOARD, LINE BY LINE
POSITION –99 to 99, 0
MIX CHROMA ON, OFF
DIFF MODE L-R, R-L
V SPLIT MODE L/R, R/L
BORDER LINE OFF, ON
CHANNEL ID (OFF), (ON)
Description
Sets the return signal input format.
Sets input format, aspect ratio, and letterbox mode.
Note
RET4 for HDCU2580 is locked to PAL.
Automatically detects the return signal input format,
and then executes.
Note
If the automatically detected result is invalid, the
previous setting flashes for 5 seconds, and then the
previous setting is maintained.
Sets the mode for linking the return signal to this
signal.
Set the FRAME SYNCHRO function for the return
signal to on/off.
Set the buffer extension function for the return signal
to on/off.
Turn the HD matrix to the SD return signal on/off.
Set the effective line setting for letterbox.
Sets the auto-linking function for this unit's aspect
setting.
"SMOOTH" is available when the return signal is HD-
SDI.
Turns the VBS output signal's cross signal on/off.
Sets the MONO COLOR function on/off.
Adjusts the color phase for the MONO COLOR
function.
Adjusts the color saturation for the MONO COLOR
function.
Turns the 3D Mode setting ON/OFF. (Available only
with the HDFA-200 expansion.)
Sets 3D Monitor output.
Displays the format.
Sets the WIPE division ratio and MIX mix ratio.
(Displayed when 3D MODE is set to ON.)
Selects whether to display chroma information when
MIX is activated.
Switches to the difference image calculation
operation.
Switches the left and right sides when splitting the
display.
Selects whether or not to display the boundary line
when splitting the display.
Selects whether to display the Channel ID with this
line's output.