Sony HDCU2580 Operation Manual page 39

NETWORK SETTINGS
Page name Item
Page No.
<LAN SETTINGS> AUTO NEGOTIATION
N02
AUTO MDIX
CONNECT
CONFIGURATION
LINK CONDITION
SET
<CNS SETTINGS> CNS MODE
N03
MCS MODE
CCU NO
MASTER IP ADDRESS 0.0.0.0 to 255.255.255.255
<NETWORK RESET> ALL RESET
N04
Settings
ON, OFF
ON, OFF
CONNECT 10M, 100M
SPEED
DUPLEX MODE HALF, FULL
MDI/MDIX MDI, MDIX
SELECT
(DOWN), (UP)
LEGACY, BRIDGE, MCS
(CLIENT)
blank, 1 to 96
Description
Selects whether to automatically set the connection
speed and communication system according to the
device connected.
Sets the communication line.
Selects the connection speed.
10M: 10BASE-TX
100M: 100BASE-TX
Available only when OFF is selected in AUTO
NEGOTIATION.
Selects the communication system.
HALF: Half-duplex communication.
FULL: Full-duplex communication.
Available only when OFF is selected in AUTO
NEGOTIATION.
Selects the communication line.
Displays connection status. (Display only)
(DOWN): Connection failure
(UP): Connection successful
A "SET OK?" message is displayed. Press ENTER
again to confirm the change. (Execute via ENTER.)
Sets the communication mode.
Displays that the CCU is a CLIENT.
Sets the CCU number.
Sets the master device's IP address for MCS mode.
A "NET SETTINGS RESET OK?" message is
displayed. Press ENTER again to reset NETWORK
SETTINGS menu items to factory default values.
(Execute via ENTER.)
39
Setup Menu