Shindaiwa Echo PB-580 H Operator's Manual
  1. Manuals
  2. Brands
  3. Shindaiwa Manuals
  4. Blower
  5. Echo PB-580 H
  6. Operator's manual

Shindaiwa Echo PB-580 H Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PB-580 H/T
Power Blower
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Read and understand all provided literature before
use. Failure to do so could result in serious injury.
X7505200609
© 1/20 ECHO Incorporated
Operator's
Manual

Advertisement

Table of Contents
loading

Related Manuals for Shindaiwa Echo PB-580 H

Summary of Contents for Shindaiwa Echo PB-580 H

  • Page 1 Operator’s Manual PB-580 H/T Power Blower The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Read and understand all provided literature before use. Failure to do so could result in serious injury. X7505200609 ©...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PB-580H/T TABLE OF CONTENTS Table of Contents..................2 Introduction ....................3 Servicing Information .................. 3 Parts/Serial Number................3 Service ....................4 ECHO Consumer Product Support ............4 Product Registration ................4 Additional Literature ................4 Safety ......................4 Manual Safety Symbols and Important Information ......

  • Page 3: Introduction

    Scan QR codes for more information. For additional literature, including safety manuals where applicable, or questions regarding terms used in this manual, visit: https://www.echo-usa.com/manuals https://www.shindaiwa-usa.com/manuals SERVICING INFORMATION Parts/Serial Number Genuine ECHO Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer.

  • Page 4: Service

    SAFETY PB-580H/T Service Service of this product during the warranty period must be performed by an Authorized ECHO Service Dealer. For the name and address of the Authorized ECHO Service Dealer nearest you, ask your retailer or call: 1-800-432-ECHO (3246). Dealer information is also available on our Web Site www.echo-usa.com.

  • Page 5: International Symbols

    PB-580H/T SAFETY The safety alert symbol accompanied by the word “WARNING” calls attention to an act or condition which CAN lead to serious personal injury or death if not avoided. The safety alert symbol accompanied by the word “CAUTION” calls attention to an act or condition which may lead to minor or moderate personal injury if not avoided.
  • Page 6 SAFETY PB-580H/T Symbol Description Symbol Description Fuel and Oil Hot Surface Mixture Idle speed Fast speed Finger severing Primer Bulb DO NOT Allow Ignition Flames or Sparks ON / OFF Near Fuel Choke Control DO NOT Smoke “COLD START” Near Fuel Position (Choke Closed) Choke Control...

  • Page 7: Personal Condition And Safety Equipment

    PB-580H/T SAFETY Personal Condition and Safety Equipment Cancer and Reproductive Harm www.P65Warnings.ca.gov The muffler or catalytic muffler and surrounding cover may become extremely hot. Always keep clear of exhaust and muffler area, otherwise serious personal injury may occur. Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed.
  • Page 8 SAFETY PB-580H/T Eye Protection Eye protection that meets ANSI Z87.1 or CE requirements ◆ must be worn whenever you operate the unit. For additional safety, a full-face shield may be worn over ◆ safety glasses or goggles to provide protection from sharp branches or flying debris.
  • Page 9 PB-580H/T SAFETY Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler. The components of this machine generate an electromagnetic field during operation, which may interfere with some pacemakers.
  • Page 10 SAFETY PB-580H/T Repetitive Stress Injuries (RSI) It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI).
  • Page 11 PB-580H/T SAFETY Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Read the Manual • Provide all users of this equipment with literature for instructions on safe operation.

  • Page 12: Equipment

    SAFETY PB-580H/T Equipment Use only approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.

  • Page 13: Emission Control (Exhaust & Evaporative)

    PB-580H/T EMISSION CONTROL EMISSION CONTROL (EXHAUST & EVAPORATIVE) CARB And EPA Emissions Control Information The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emission Control Information label (sample below) is “B”, “C”, “K”, or “T”, the emission control system is EM and TWC (3-...

  • Page 14: Description

    DESCRIPTION PB-580H/T DESCRIPTION PB-580 H Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. The safety decal is for example only.
  • Page 15 PB-580H/T DESCRIPTION Handle Throttle Position Lever/stop Switch Spark Plug Shoulder Harness Safety Decal Stick Handle Blower Pipes Flexible Pipes Spark Arrestor Muffler (with or without Catalyst) 10. Fuel Tank 11. Fuel Tank Cap 12. Recoil Starter Handle 13. Air Cleaner 14.
  • Page 16 DESCRIPTION PB-580H/T PB-580T Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. The safety decal is for example only.
  • Page 17 PB-580H/T DESCRIPTION Shoulder Harness Safety Decal Throttle Control Blower Pipes Flexible Pipes Spark Arrestor Muffler (with or without Catalyst) Fuel Tank Fuel Tank Cap Recoil Starter Handle 10. Air Cleaner 11. Spark Plug 12. Choke 13. Purge Bulb 14. Throttle Position Lever 15.

  • Page 18: Contents

    CONTENTS PB-580H/T CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

  • Page 19: Assembly

    PB-580H/T ASSEMBLY ASSEMBLY PB-580 H Never perform maintenance or assembly procedures with engine running or serious personal injury may result. Install Blower Pipes and Stick Handle Assemble clamps (A) onto both ends of flexible pipe (B). Assemble straight pipe with swivel (C) into flexible pipe (B).

  • Page 20: Install Blower Pipes

    ASSEMBLY PB-580H/T Assemble straight pipe (J) onto swivel pipe (C), until you feel light resistance. Hold swivel pipe and turn straight pipe clockwise, engaging positive locking channels, until connection is firm. Do not force connection. Assemble straight pipe with decal (K) to straight pipe (J) as in step 7.
  • Page 21 PB-580H/T ASSEMBLY Note: Anti-static wire before installation. Route anti-static wire below fan housing and clip wire into throttle cable retaining clip (X). Position wire outside blower elbow. Insert anti-static wire through flex tube. Leave enough slack in anti-static wire to allow for full rotation of elbow.
  • Page 22 ASSEMBLY PB-580H/T Position throttle cable along the outside of elbow. Loosen knob (H) on handle (E). Align notches in handle with tabs (F) and install onto swivel pipe (C) past long ridges in pipe. Insert anti-static wire through swivel pipe (wire will hang freely in pipe).

  • Page 23: Operation

    PB-580H/T OPERATION OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

  • Page 24: Fuel

    OPERATION PB-580H/T Fuel Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E -85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of diesel or alternative fuels may cause performance problems, loss of power, overheating, fuel vapor lock, and unintended machine operation, including, but not limited to, improper clutch engagement.
  • Page 25 PB-580H/T OPERATION AVOID repeated or prolonged skin contact. ◆ AVOID inhaling oil mists or vapors. ◆ ECHO branded 2-stroke oils may be mixed at 50:1 ratio for application in all ECHO engines sold in the past regardless of ratio specified in those manuals. Handling Fuel Fuel is VERY flammable.
  • Page 26 OPERATION PB-580H/T Mixing Instructions Fuel to Oil Mix – 50:1 Ratio Fill an approved fuel container Metric with half of the required amount of gasoline. Add the proper amount of gal. fl.oz. 2-stroke oil to gasoline. Close container and shake to mix oil with gasoline.
  • Page 27 PB-580H/T OPERATION Starting Cold Engine • Recoil starter: Use short pulls - only 1/2- 2/3 of rope length for starting. Do not allow the rope to snap back in. Always hold the unit firmly. • (PB-580H): Rotate spring loaded throttle arm downward to a comfortable operating position.

  • Page 28: Starting Warm Engine

    OPERATION PB-580H/T Starting Warm Engine The starting procedure is the same as Cold Start except DO NOT close the choke.v Throttle Lever PB-580 H Move throttle lever (A) to IDLE position. Purge Bulb Pump purge bulb (C) until fuel is visible.

  • Page 29: Operating Blower

    PB-580H/T OPERATION - PB-580 T Throttle Lever Release throttle trigger. Move Throttle Lever (A) forward to idle position and allow engine to return to idle before shutting off engine. Throttle Lever Move Throttle Lever (A) all the way forward to STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine.
  • Page 30 OPERATION PB-580H/T To avoid engine damage due to over-revving, do not block blower pipe. Use only during appropriate hours. Contact your local government for the ordinances affecting your area. To reduce sound levels, limit the number of pieces of equipment used at any one time.

  • Page 31: Cold Weather Operation

    PB-580H/T OPERATION Contacting blower pipe tip on abrasive surfaces can create sharp cutting edges and can result in personal injury if touched. Do not scrape or drag blower pipe tip when operating or transporting unit. Replace blower pipe assembly if protective metal ring is worn, cracked or deformed.

  • Page 32: Adjust The Harness

    OPERATION PB-580H/T Install intake cover (B) on frame over air intake. Install back cushion (A) to frame over intake cover. Note: Blower performance may be reduced slightly. Adjust the Harness Loosen upper and lower buckles (A), then put blower on your back.

  • Page 33: Maintenance

    Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. Level 3 = See your dealer. Click HERE or go to http://www.echo-usa.com/products/maintenance-kit HERE https://www.shindaiwa-usa.com/you-can.aspx For information about maintenance kits. X7505200609 © 1/20 ECHO Incorporated...

  • Page 34: Maintenance Intervals

    MAINTENANCE PB-580H/T Maintenance Intervals SKILL COMPONENT/SYSTEM MAINTENANCE PROCEDURE LEVEL Daily or Before Use Air Filter Inspect/Clean Choke Shutter Fuel System Inspect Cooling System Inspect/Clean Recoil Starter Rope Inspect/Clean Screws/Nuts/Bolts Inspect/Tighten/Replace Every Refuel Fuel System Inspect Cooling System Inspect/Clean 3 Months Air Filter Replace Fuel Filter...
  • Page 35 PB-580H/T MAINTENANCE Air Filter Level 1. Parts Required: Tune Up Kit. CLOSE choke (COLD START ] position). This prevents dirt from entering the carburetor throat when the air filter is removed. Brush accumulated dirt from air cleaner area. Remove air filter cover. Brush dirt from inside cover.

  • Page 36: Spark Plug

    MAINTENANCE PB-580H/T Fuel Filter Level 1. Parts Required: Tune Up Kit. Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result. Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

  • Page 37: Cooling System

    PB-580H/T MAINTENANCE Remove spark plug and check for fouling, worn and rounded center electrode. Clean the plug or replace with a new one. DO NOT sand blast to clean. Remaining sand will damage engine. 0.65 mm (0.026 in.) Adjust spark plug gap by bending outer electrode.

  • Page 38: Exhaust System

    MAINTENANCE PB-580H/T Cleaning Cylinder Fins Remove spark plug. Remove starter Remove engine cover. Clean cylinder fins (A) to allow cooling air to pass freely Assemble components in reverse order. Exhaust System Spark Arrestor Screen Level 2. Parts Required: Spark Arrestor Screen, Gasket Carbon deposits in muffler will cause a drop in engine output and overheating.
  • Page 39 PB-580H/T MAINTENANCE Replace gasket. Assemble components in reverse order. Exhaust Port Cleaning Level 2. Parts Required: Heat Shield Remove spark plug. Remove starter Remove engine cover. Place piston at top dead center. Remove muffler (A) heat shield (B). Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port.

  • Page 40: Carburetor Adjustment

    MAINTENANCE PB-580H/T Assure heat shield is installed correctly behind rib (A) and in front of rib (B) in fan case. Install muffler. Tighten muffler mounting bolts (or nuts) to 90-110 kgf • cm (80-95 in • lbf). Assemble components in reverse order.

  • Page 41: Throttle Cable Adjustment

    PB-580H/T MAINTENANCE Idle Adjustment Before adjustment make sure that: • Air filter is clean and properly installed. • Spark arrestor screen and muffler are free of carbon. • Blower pipes are installed. Start engine, run at idle for one minute. Complete warm up by running at full throttle for 5 minutes, operating choke twice to clear...

  • Page 42: Troubleshooting

    TROUBLESHOOTING PB-580H/T Turn Adjustment Screw until Throttle Trigger free play is 4 - 6 mm (3/16-1/4 in.). After adjustment, squeeze and release Throttle Trigger several times to verify Carburetor 4-6 mm Throttle Shaft has full range of movement from idle to wide open throttle positions.
  • Page 43 PB-580H/T TROUBLESHOOTING ENGINE PROBLEM TROUBLESHOOTING CHART Problem Check Status Cause Remedy No fuel at Carburetor See your dealer cylinder OPEN choke Fuel at Clean or replace cylinder Muffler wet Fuel mixture air filter with fuel too rich Adjust carburetor Engine starts See your dealer hard...

  • Page 44: Storage

    STORAGE PB-580H/T STORAGE During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result. Long Term Storage (Over 30 Days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following:...

  • Page 45: Specifications

    PB-580H/T SPECIFICATIONS SPECIFICATIONS MODEL PB-580 H PB-580 T Length (w/o pipes) 379 mm (14.92in.) 379 mm (14.92 in.) Width (w/o pipes) 537 mm (21.14 in.) 478 mm (18.82 in.) Height (w/o pipes) 459 mm (18.07 in.) Weight (dry) (w/o pipes) 9.4 kg (20.7 lb.) 9.3 kg (20.5 lb.) Air cooled, two-stroke, single cylinder gasoline...

  • Page 46: Product Registration

    PRODUCT REGISTRATION PB-580H/T PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
  • Page 47 PB-580H/T PRODUCT REGISTRATION X7505200609 © 1/20 ECHO Incorporated...
  • Page 48 (H) P44514001001 - P44514999999 P48314001001 - P48314999999 (T) P44614080845 - P44614999999 P48414080845 - P48414999999 ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com...

This manual is also suitable for:

Echo pb-580 t

Table of Contents