Advertisement
Ubee Interactive — www.ubeeinteractive.com
ONLINE—When the device is obtaining an IP
address and configuration file, the LED flashes.
When device obtains these items, the LED is On.
2.4G—When 2.4G Wi-Fi is enabled, the LED is
On. When 2.4G Wi-Fi is disabled, the LED is Off.
5G—
When 5G Wi-Fi is enabled, the LED is
On. When 5G Wi-Fi is disabled, the LED is
Off.
Tel 1/Tel 2—The LED is On when a telephone is
on-hook. The LED flashes when a telephone is
off-hook.
MoCA— When MoCA is enabled, the LED is On.
When MoCA is disabled, the LED is Off.
When passing MoCA network traffic, the LED is
flashing.
Battery—LED is On when the battery is installed
and charged. LED is Off if no battery is installed.
If the battery is at low power level (30mins left),
the battery LED will flash.
WPS (top of device)—If not used, the LED is Off.
7
Ubee DVW32G6 – Safety and Installation Product Insert v1.0
When the user pushes the WPS button or
triggers WPS via the device's web GUI, the LED
flashes white for 4 minutes until a PIN is entered
from a wireless client that wishes to connect.
After a Wi-Fi client attaches successfully, the
LED remains solid white for 5 minutes, and then
turns off.
Advertisement
