Honeywell Fire-Lite Alarms MS-9600 Manual page 154

NFPA Standard-Specific Requirements
NFPA 72 Remote Station Protective Signaling System
Notes:
1. Cut Jumper JP6 on the MS-9600 main circuit board to supervise placement of the 4XTMF
module.
2. Refer to "4XTMF Transmitter Module Installation" on page 36 for detailed information.
Cutting TBL Jumper allows the
reverse polarity circuit to open
with a system trouble condition
if no alarm condition exists.
154
Fire•Lite RS82 Remote Station Receiver UL listed.
Refer to Fire•Lite Alarms, Inc., Instruction Manual for
Remote Station Receiver Model RS82.
Figure C.5 Remote Station Connection Using 4XTMF Module
Polarity Shown is
+ -
Normal Standby
+
Power-limited
-
Ω
(Dummy load with a 4.7K
resistor when no connection is made)
4XTMF Transmitter Module
MS-9600 PN 51335:E1 2/14/08
Correlations
, ¼ watt