Features and Options
MS-9600 PN 51335:E1 2/14/08
•
PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
•
Annunciators:
ACM Series-LED Zone Annunciators
LDM Graphic Annunciator Series
LCD-80F Liquid Crystal Display point annunciator
ACM-8RF Relay Module
•
Silence inhibit timer option per NAC
•
Autosilence timer option per NAC
•
Continuous, March Time, Temporal or California code for main circuit board
NACs with two-stage capability
•
Selectable strobe synchronization per NAC
•
Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules,
AFM annunciators or LCD-80F Remote annunciator
•
Auto-program (learn mode) reduces installation time. Reports two devices set to
the same address
•
Password and key-protected nonvolatile memory
•
User programmable password
•
Fully programmable from local keypad or keyboard or local PC
•
SLC operates up to 10,000 ft. (3,000 m) with twisted, shielded wire or 3,000 ft
(900 m) with untwisted, unshielded wire
•
Compatible with Fire•Lite newer series devices (CLIP Mode)
CP350 and CP355: addressable Ionization Smoke Detector
SD350(T) and SD355(T): addressable Photo Smoke Detector (T= with
Thermal Sensor)
H350(R) and H350(R): Fast Response Heat Detector (R=Rate-of-Rise option)
D350P(R): addressable Photo Duct Detector (R=alarm relay option)
B501BH & B501BHT Sounder Base
B224RB Relay Base
B224BI Isolator Base
MMF-300: Monitor Module
MMF-300-10: Monitor Module (10 Input Class B or 5 Input Class A)
MDF-300: Dual Monitor Module (uses two consecutive SLC addresses)
MMF-301: Miniature Monitor Module
MMF-302: 2-wire Detector Module
MMF-302-6: 2-wire Detector Module (6 Input Class B or 3 Input Class A)
CMF-300: Control Module
CMF-300-6: Control Module (6 Output Class B or 3 Output Class A)
CRF-300: Relay Module
CRF-300-6: Relay Module (6 Form-C relays)
BG-12LX: Manual Pull Station
I300: Isolator Module
•
Compatible with legacy Fire•Lite 300 Series devices (CLIP Mode only):
CP300: addressable Ionization Smoke Detector
SD300(T): addressable Photoelectric Smoke Detector (T= Thermal Sensor)
C304: Control Module
M300: Monitor Module
M301: Miniature Monitor Module
M302: 2-wire Detector Module
BG-10LX: Manual Pull Station
•
Optional 4XTMF module (conventional reverse polarity/city box transmitter)
•
Optional DACT-UD Digital Alarm Communicator Transmitter, reports up to 99
zones or 636 points (all devices) to a UL listed Central Station
Product Description
13