Honda NRX1800 2004 Owner's Manual page 190

Circuit Fuse Access:
6. To check or replace a circuit fuse, pull
the old fuse out of its retaining clips
with the fuse remover ( ). Look for a
burned wire inside the fuse. If the fuse
is blown ( 4 ), replace it with a spare
fuse ( 5 ) of the same rating or lower.
(3)
(3) fuse remover
3
If a Fuse Blows
MAIN A & CIRCUIT FUSE
(4)
(4) blown fuse
7. Install the fuse box cover.
8. Install the seat.
If you do not have a replacement fuse with
the proper rating for the circuit, install one
with a lower rating.
Replacing a f use with one that has a
higher rating greatly increases the chance
of damage to the electrical system.
Taking Care of the Unexpected
181