Honda NRX1800 2004 Owner's Manual page 178

8. Rotate the fender bracket ( ) to access
the fixing bolts.
9. Remove the fixing bolts (
remove right and left caliper assemblies
( 11 ) from caliper stays.
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn't hang from
the hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
9
10 ) and
If You Have a Flat Tire
RIGHT FRONT
(13)
(12)
(12) pivot arm pinch bolt cap
(13) pivot arm pinch bolt
(14) axle bolt
10. Remove the pivot arm pinch bolt caps
( 12 ), then loosen the right and left
pivot arm pinch bolts (
the axle bolt ( 14
Taking Care of the Unexpected
(14)
13 ) and remove
).
(cont'd)
169