Table of Contents
Advertisement
This procedure requires mechanical skill
and professional tools such as a torque
wrench and oil filter wrench, as well as a
means for disposing of the drained fluid
(page
156
). If you do not have the skills
or the tools, see your Honda dealer.
Drain the Engine Oil:
1.
Park the motorcycle on its side stand on
a firm, level surface.
2.
If the engine is cold, start it and let it
−
idle for 3 5 minutes. Turn the engine
off. Wait 2 3 minutes for the oil to
−
settle.
3.
Remove the oil filler cap/dipstick with a
coin.
4.
Place a drain pan under the crankcase
drain bolt ( ).
1
5.
To drain the oil, remove the crankcase
drain bolt ( ) and sealing washer ( ).
1
UNDER ENGINE
(1) crankcase drain bolt
(2) sealing washer
6.
After the engine oil has been drained
out, hold the motorcycle upright for 10
−
15 seconds to assure complete
draining.
2
Engine Oil & Filter
(2)
(1)
Servicing Your Honda
(cont'd)
101
Advertisement
Chapters
Table of Contents
