Honda NRX1800 2004 Owner's Manual page 121

Final Drive Oil
6. After the oil has completely drained,
check that the sealing washer ( ) is in
good condition. Reinstall the drain bolt
with its sealing washer (or a new
washer, if necessary) and tighten it to
the specified torque:
14 lbf·ft (20 N·m , 2.0 kgf·m)
7. Fill the final drive with the
recommended oil:
4.2 US oz (125 cm )
Make sure the final drive oil level is at
the lower edge of the oil filler
inspection hole ( ). 4
8. Apply a thin coat of gear oil to the O-
ring of oil filler cap.
9. Install the oil filler cap and tighten to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
112
Servicing Your Honda
10. Install the final gear cover. Tighten the
3 bolts to the specified torque:
7 lbf·ft (9.8 N·m , 1.0 kgf·m)
11. Install the muffler cover bolts and
tighten to the specified torque:
10 lbf·ft (14 N·m , 1.4 kgf·m)
12. Install the right side covers.