Table of Contents
Advertisement
Connectors and LEDs
Item
Description
Connectors
Power
5 Volt power jack.
Ethernet
RJ45 Ethernet jack.
Reset
Reset button. Reboots device or restores factory defaults. Refer to
details.
(No label)
Connector for external LoRa antenna.
SIM
Cellular models only. Micro (3FF) SIM slot. Refer to Installing SIM Card for details.
LEDs
STATUS
Blinks when operating system is fully loaded.
LORA
Lights when LoRa software is active.
CELL
Cellular models only. Lights when there is power to the radio. Blinks when the SIM is registered
with the carrier.
Ethernet Link
Left LED on the Ethernet connector. Blinks when data is sent or received on the Ethernet link.
Steady light when there is a valid Ethernet connection.
Ethernet Speed Right LED on the Ethernet connector. Lit when the Ethernet is linked at 100 Mbps. If not lit, the
Ethernet is linked at 10 Mbps.
®
Conduit
AP MTCAP2-LNA3-915-042x-POE and MTCAP2-915-042x-POE User Guide
LoRa only models
LoRa and cellular radio models
SPECIFICATIONS AND HARDWARE INFORMATION
Resetting the Device
for
9
Advertisement
Table of Contents
