(6) Power Management
The Power Management feature will turn off the television receiver if no input control command is received
from either the Local or IR Key within a selected hours.
y Activity on either of these inputs shall restart the 'Power Management' timer and check key time interval
y
again.
y This entry can be set to a value which is corresponding to the desired hours (1 to 7).
y
y Default value is 'Off(disabled)'.
y
y TV should off and on after apply this setting.
y
(7) DTV Channel Update
It is a mode to set whether to update DTV channel information automatically or not.
y When DTV Channel Update is set to 'Auto', the function to update TV's programme map according to
y
DTV channel's stream information
y DTV Channel Update is set to 'Manual', the function to keep TV's channel map even though DTV
y
programme's information is changed.
(8) Power On Default
Set the input source or channel to display and. A/V settings when turn on power in AC Power On or Stand-
by status.
(8-1) Input Source
Set whether it is turned on by the set input source or by the last stored input source.
y It is turned on by the Last Memory Input if the Input source is turned off.
y
y It is turned on by the Last Pr. If the Input source is turned off and the last memory Input is the RF.
y
y The available Input Source values should be rotated.
y
y If both the Input source and the 'On Time' menu are set, the Input source takes the priority.
y
y When the Input source is changed to the TV, Programme menu is available.
y
y When the Input source is changed to the ATV, the Program No. is set to 0. (If the channel map structure
y
does not support this, it depends on model's channel handling.
y Access to an input source item and a channel in 'On Timer' menu must be disabled when Power On
y
Default is activated.
(8-2) Programme
Select start channel number if Input source's value is TV. (in case of ATV, it means physical channel
number.)
8