Related Manuals for LG LW300C-U Series
Summary of Contents for LG LW300C-U Series
- Page 1 INSTALLATION MANUAL LED TV Please read this manual carefully before operating your set and retain it for future reference. LW300C-U* LW340H-U* LW540S-U* LW340C-U* www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INSTALLATION MENU Introduction Public Display Mode TV Manager - 1. USB - 2. Diagnostics Password Change Set ID Setup Configuration Setup Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image SuperSign Server Setup NTP Timer sync 33 DIGITAL SIGNAGE MEDIA PLAYER Digital Signage Media Player Overview 34 EXTERNAL CONTROL DEVICE SETUP... -
Page 3: Installation Menu
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators. -
Page 4: Public Display Mode
Public Display Mode y Image shown may differ from your TV. Public Display Settings (V 3.0) Installation Menu (V 3.0) ▲ Public Display Settings Public Display Mode Public Display Settings ◄ ► TV Manager • Power On Status Password Change •... - Page 5 Operation’ and ‘Local Key Operation’ will be worked by below. (4-1) IR Operation Decide whether work the LG remote control or not. y Able to set Normal, Use PWR Only, Block All y When ‘IR Operation’ is set to Block All, all normal remote keys don’t work. Use PWR Only (Block except power) makes block all remote keys except power key.
- Page 6 (4-2) Local Key Operation Decide to operate 'Local/Front Key' working behavior by setting ‘Local Key Operation’ as Normal, Use PWR Only, Block All. y When 'Local Key Operation' is set to Block All, all local keys don’t work. If value is Use PWR Only, it blocks all local keys except power key.
- Page 7 (5-3) Channel Change Decide to change channel or not by setting ‘Channel Change' as ‘Yes’(Change Possible) or ‘No’(Change Impossible) when present source is TV. y When ‘Channel Change' is set to No (Change Impossible) » Channel Key, Numeral Key, List Key, Q.View Key don't work and entering 'Channel Menu' in the Main Menu OSD is impossible.
- Page 8 (6) Power Management The Power Management feature will turn off the television receiver if no input control command is received from either the Local or IR Key within a selected hours. y Activity on either of these inputs shall restart the ‘Power Management’ timer and check key time interval again.
- Page 9 (8-3) Major Select major part of start channel number if Input source value is TV. (in case of ATV, it means physical channel number.) (8-4) Minor Select minor part of start channel number if Input source value is TV. (8-5) A/V Setting If ‘A/V Setting’...
- Page 10 (9) Aux Source Setting The Auxiliary (Input) Source Setting feature will enable or disable for each external input. When ‘Aux Source Setting’ is set to Yes(Work), the RJP or HDMI-CEC / HTNG will not operate. (9-1) Input Source y Available Input Source List (9-2) Setting y Decide whether selected ‘Input Source’...
- Page 11 Public Display Settings Item Enable Disable Initial Public Display Settings Power On Status *STD Volume Start Volume Off, Minimum Volume ~ Maximum Volume Maximum Volume Minimum Volume ~ 100 Minimum Volume 0 ~ Maximum Volume Key Operation IR Operation Normal / Use PWR Only / Block All Normal Local Key Operation Normal / Use PWR Only / Block All...
-
Page 12: Tv Manager
TV Manager 1. USB Ez Download Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL (see Send to USB descriptions for more information regarding file types), Logo Image, etc (TLX, MICOM for Pro:Centric). * Splash images and EPK files should be copied into the folder named LG_DTV on the USB. - Page 13 SPI Boot or LG Boot Logo. If you checked the LG Boot Logo checkbox, then the Splash image, if selected, will be unchecked. Also, if you select the LG Boot Logo and proceed with the download, the existing Splash image will be deleted.
- Page 14 USB Cloning An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map. This newer procedure significantly decreases the installation time that would be necessary if the standard RS-232C method were used instead.
- Page 15 Receive From USB y Image shown may differ from your TV. Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) Public Display Settings TV Manager Password Change...
- Page 16 Send To USB y Image shown may differ from your TV. Plug USB memory card into the USB port of the TV. Use the button to select the TV Manager option and then press the OK button. Installation Menu (V 3.0) Public Display Settings TV Manager Password Change...
- Page 17 Logo Image Download Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder. y Image shown may differ from your TV. Connect the USB device to the USB IN jack on the TV. /DVI IN (RGB) ONENT...
-
Page 18: Diagnostics
2. Diagnostics Diagnostics Setup Introduction This diagnostic function provides current status information of the TV in XML file format using a USB device. If the user sets a signal standard level, SignalTrace checks the signal strength status of the digital channel that the user tuned to. It checks and records good and bad channel signals, and then provides the signal information to a USB storage device in XML file format. - Page 19 y Go to Installation menu -> TV Manager -> Diagnostics -> Diagnostics Setup y Set the level value in Signal Tracer Set. (Disable, 10 to 90) TV Manager Diagnostics Setup Diagnostics Setup Signal Tracer Set Disable Diagnostics ► ◄ Previous Previous y Change the channel and tune to a digital channel, then maintain the status for more than 5 seconds.
-
Page 20: Password Change
Password Change y Image shown may differ from your TV. - To ensure more security, Password can be changed by installers’ own design. - The changed password is applied to the ‘extra contents’ password.( *Only for LW340H-UA series) Installation Menu (V 3.0) Public Display Settings TV Manager Password Change... -
Page 21: Set Id Setup
Set ID Setup Installation Menu (V 3.0) Public Display Settings Set ID Setup TV Manager Password Change Set ID Lock ◄ ► Set ID Setup Set ID Setup Set ID Configuration Setup Previous Time Scheduler Lock Mode External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 Use the... -
Page 22: Configuration Setup
Configuration Setup y Image shown may differ from your TV. Installation Menu (V 3.0) Configuration Setup Public Display Settings Number of RCU TV Manager Splash Offset Time Password Change ◄ ► USB Auto Playback Set ID Setup Photo Configuration Setup 15Min Auto Off Disable Time Scheduler... - Page 23 For the audio signal, the priority order is the RGB -> AV -> Audio In component ports. (8) Screen Saver Cube y When ‘Screen Saver Cube’ is set to ‘No’, TV will do not display LG Screen Cube. (9) WOL(Wake On Lan) * Depending upon model y If Set to "YES", User can turn on the TV by using LAN network.
-
Page 24: Time Scheduler
Time Scheduler Installation Menu (V 3.0) Public Display Settings TV Manager Password Change Time Scheduler Set ID Setup Time Scheduler Configuration Setup ◄ ► On Timer Time scheduler Time Scheduler Lock Mode Off Timer External Speaker Previous HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 Use the button to select the Time Scheduler. -
Page 25: Lock Mode
Lock Mode Installation Menu (V 3.0) Public Display Settings TV Manager Password Change Lock Mode Set ID Setup Enable Data Service Configuration Setup ◄ ► Enable Time scheduler Enable Lock Mode Factory Reset External Speaker Previous HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 Use the button to select the Lock Mode. -
Page 26: External Speaker
External Speaker Installation Menu (V 3.0) Public Display Settings TV Manager Password Change External Speaker Set ID Setup Fixed ◄ ► Volume Control Configuration Setup 1 Watt Output Time scheduler Lock Mode Previous External Speaker HCEC Setup Insert Image S/W : 02.00.00.01 Micom : 0.00.84 Use the button to select the External Speaker. - Page 27 Speaker output SETUP Connect the external speaker to the external speaker out jack on the TV. EXTERNAL SPEAKER OUT RIGHT LEFT NOTE y External speaker must be used three plug(SE : Single Ended, Stereo) as shown in the drawings and external speaker fully inserted with external Speaker Jack.
-
Page 28: Hcec Setup
HCEC Setup Installation Menu (V 3.0) Public Display Settings TV Manager Password Change HCEC Setup Set ID Setup CEC Mode Default ◄ ► Configuration Setup IR Decoding Time scheduler Device ID Lock Mode StandBy External Speaker HTNG HotelMode HCEC Setup Previous Insert Image S/W : 02.00.00.01 Micom : 0.00.84... - Page 29 (c) Stand By y Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c) Command(Device Power)]. y The detailed scenario is described on the table below. Send Receive Send Only Receive Only (2) HTNG HotelMode y If the following options are selected because of the HTNG command: *Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume, then the value for the HTNG HotelMode changes automatically to Yes and, even if the HotelMode is set to No, the above options are still affected.
-
Page 30: Insert Image
INSERT IMAGE y This feature allows you to display an image you have stored on the TV instead of the LG Cube when there is no signal due to DTV signal attenuation, external device failure, or cable removal. Installation Menu (V 3.0) -
Page 31: Supersign Server Setup
SUPERSIGN SERVER SETUP (* Only for LW540S-UA series) Installation Menu (V 3.0) Public Display Settings TV Manager SuperSign Server Setup Password Change Play Name Press OK Set ID Setup Server IP Setting Press OK Configuration Setup Server IP Status Time Scheduler Not connected Lock Mode Previous... -
Page 32: Ntp Timer Sync
NTP Timer sync (* Except for LW340H-UA series) y This feature allows you to receive time information via NTP(Network Time Protocol) Time Server to set current clock. Installation Menu (V 3.0) Public Display Settings TV manager Password Change NTP Timer Sync Set ID Setup NTP Timer Sync Configuration Setup... -
Page 33: Digital Signage Media Player
DIGITAL SIGNAGE MEDIA PLAYER Digital Signage Media Player Overview (* Except for LW340H-UA series) The Digital Signage Media Player can play content produced and distributed by SuperSign Elite-W. Supported content types consist of photographs, videos, external inputs such as TV broadcasts, texts, and music. -
Page 34: External Control Device Setup Key Codes
EXTERNAL CONTROL DEVICE SETUP KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List, - (ATSC Only) R/C Button CH -, PR - R/C Button List R/C Button Volume +... - Page 35 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 36 Customer Computer RS-232C configurations 3-Wire Configurations(Not standard) RS-232C (Serial port) D-Sub 9 Phone Set ID For Set ID number, see "Real Data Mapping". Press SETTINGS to access the main menus. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK. Press the Navigation buttons to scroll to SET ID and press OK.
- Page 37 Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA DATA...
- Page 38 Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 39 * Commands may work differently depending on model and signal. 01. Power (Command: k a) 03. Screen Mute (Command: k d) ► To control Power *On or Off of the set. ► To select screen mute on/off. Transmission[k][a][ ][Set ID][ ][Data][Cr] Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Data 00 : Power Off...
- Page 40 13. Treble (Command: k r) ► To adjust treble. 08. Color/Colour (Command: k i) You can also adjust in the AUDIO menu. ► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Data Min : 00 to Max : 64...
- Page 41 18. Equalizer (Command : j v) [Data 00][Data 01]: Channel Data Data 00 : High Channel data ► Adjust EQ of the set. Data 01 : Low Channel data Transmission [j][v][ ][Set ID][ ][Data][Cr] - 00 00 ~ 27 0F (Decimal: 0 ~ 9999) Data 02 : Input Source (Digital) - 10 : Antenna TV (DTV) - 20 : Antenna Radio (Radio)
- Page 42 Data 00 : xx (Don't care) Data 05 : Input Source (Digital/Satellite for Japan) - 02 : Antenna TV (DTV) [Data 01][Data 02]: Major Channel Number - 07 : BS (Broadcasting Satellite) Data 01 : High byte Channel Data - 08 : CS1 (Communication Satellite 1) Data 02 : Low byte Channel Data - 09 : CS2 (Communication Satellite 2) - 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
- Page 43 23. Control Backlight (Command: m g) 25. 3D(Command: x t) (only 3D models) (Depending on model) • For LCD TV / LED TV ► To control the backlight. ► To change 3D mode for TV. Transmission [m][g][ ][Set ID][ ][Data][Cr] Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] Data Min : 00 to Max : 64...
- Page 44 26. Extended 3D(Command: x v) (only 3D models) (Depending on model) ► To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] [Data 00] 3D option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming...