LG LW300C-CA Installation Manual page 17

Logo Image Download
Make a 'LG_DTV' folder on the USB flash drive and then copy the splash image file to that folder.
y Image shown may differ from your TV.
y
1
Connect the USB device to the USB IN jack on the TV.
/DVI IN
2
AV
(RGB)
AUDIO IN OPTICAL
MPONENT/RGB/DVI) AUDIO OUT
RGB IN (PC)
2
Use the
RS-232C IN
Installation Menu (V 3.0)
(CONTROL & SERVICE)
LG Hotel Mode Setup
TV Manager
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Welcome Video
S/W : 02.00.00.01 Micom : 0.00.84
3 Use the
TV Manager
USB
Diagnostics
Previous
4
Use the
Logo Image Download
Image1.jpg
Image2.jpg
Image3.jpg
Previous
NOTE
► Splash Image update function supports only JPEG format file of less than 1 MB filesize.
► Except for JPEG images with progressive encoding.
► We recommend you that splash image resolution match the TV`s panel resolution.
► 'Max resolution of splash image : Full HD->1920x1080, HD->1360x768.
► 'Min resolution of splash image : Full HD->64x64, HD->64x64.
► TV keep splash image until you change a new splash image.
► Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to use DZM file on EZ
Download.
► Non-standard photo/image file may not be displayed.
ANTENNA/
CABLE IN
button to select the TV Manager option and then press the OK button.
OK
button to select the USB and Logo Image Download and press the OK button.
Ez Download
Receive from USB
Send to USB
Logo Image Download
OK
button to select the desired file name and press the OK button.
OK
17