LG LW300C-CA Installation Manual page 23

(4) 15Min Auto Off
y When '15Min Auto Off' is set to 'Enable', TV will turn off if there is no signal in 15Min.
y
(5) Auto Sensing
y -If 'Auto Sensing' is set to 'To Set ⊙ ', the input is automatically switched when the input signal that
y
you set to 'ON' is received.
y If 'Auto Sensing' is set to 'Disable', the input is not switched when the input signal is received.
y
y If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
y
y If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to
y
the previous setting.
y If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
y
performed several times, the input returns to the previous setting only for the last input and does
not repeat the operation for the rest.
y For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV
y
input because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)
(6) Forced DVI Audio
y When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted
y
through the RGB, AV, or Audio In #1 component ports.
y The video signal will be transmitted through HDMI to be displayed on the screen in standard
y
quality.
y For the audio signal, the priority order is the RGB -> AV -> Audio In component ports.
y
(7) Screen Saver Cube
y When 'Screen Saver Cube' is set to 'No', TV will do not display LG Screen Cube.
y
(8) One Channel Map
y If 'One Channel Map' is 'YES', the TV will operate as below.
y
A. In 'Programme Edit' window, all channels are shown in a single list regardless of input source.
(DTV/RADIO/TV) (For satellite supported models, a Satellite input source is also included.)
B. Select the 'Auto Sort' button in the 'Programme Edit' window to sort channels sequentially.
23