LG LW300C-CA Installation Manual page 6

(4-2) Local Key Operation
Decide to operate 'Local/Front Key' working behavior by setting 'Local Key Operation' as Normal, Use PWR
Only, Block All.
y When 'Local Key Operation' is set to Block All, all local keys don't work. If value is Use PWR Only, it
y
blocks all local keys except power key.
y When 'Local Key Operation' is set to Normal, all local key are available.
y
Exception)
In case of power off condition with all key are blocked, 'Power On Status' value turns to 'PWR',
and disabled status to fix value for power on operation. (fool-proof routine)
• Power On Status
•
Key Operation
• IR Operation
• Local Key Operation
(5) Limited Mode
Configure TV function's limitation. When selected to 'Yes', following sub-menus will be worked by below.
(5-1) Setup Menu
Decide to enter 'Setup' Menu' as 'Yes'(Enter possible) or 'No'(Enter impossible)
(5-2) Input Source Change
Decide to change input source or not by setting 'Input Source Change' as Yes(Change possible) or
No (Change impossible).
y When 'Input Source Change' is set to 'No' (Change impossible)
y
» 'INPUT key' doesn't work, and Input Source Changing via 'TV D/A' key, 'TV/RADIO' key aren't
y
possible (ex. Press TV/RADIO Key in HDMI source to view TV channel)
» User's input (pressing Programme key, numeral key, List key, Q.View key in all Input source
y
except TV source) doesn't work.
» Entering 'Setup Menu' item in the 'Main Menu OSD' except TV mode doesn't accepted.
y
Because entering 'Setup Menu' item makes present mode as TV mode even though present
mode is not TV. Change to TV mode isn't allowed.
» TV set always turns on fixed input source and volume information regardless of already
y
set information.
» Entering 'Setup Menu' except TV mode is impossible regardless of 'Programme Change'
y
or 'Setup Menu' items' value.
» TV can be only turned on with the input source which is irrelevant from the programme
y
related information set (volume, input) in 'On Time' Menu.
» Auto AV and HDMI-CEC still work regardless of Input Source Change's value.
y
» When 'Input Source Change' is set to Yes(Change possible), changing input source is available.
y
6
STD
◄ ►
Yes
◄ ►
Block All
◄ ►
Block All
◄ ►
• Power On Status
PWR
◄ ►
•
Key Operation
Yes
◄ ►
• IR Operation
Block All
►
◄
• Local Key Operation
Block All
◄ ►