Insert Image - LG LW300C-CA Installation Manual

INSERT IMAGE

y This feature allows you to display an image you have stored on the TV instead of the LG Cube
y
when there is no signal due to DTV signal attenuation, external device failure, or cable removal.
1
Select Insert Image with the
2
Insert Image
y Enables or disables Insert Image .
y
3
Mode
y Select Original, Fit, or Full Mode as the mode for Insert Image .
y
- Original: displays the original size of the image stored on your USB storage.
- Fit: displays the image at a size that fits the aspect ratio of the TV.
- Full: displays the image at a size that fits the full screen of the TV.
4
Slide Time
y Select 5, 10, 15, or 20 seconds to display the selected image.
y
NOTE
y Only images in a JPG file format can be downloaded and displayed.
y
y The size of the images to be downloaded should not exceed 10 MB. You can select multiple images to
y
download.
y For best results, the resolution of the images downloaded should be 1920*1080 (FHD) or smaller.
y
y For detailed information about downloading images, go to TV Manager > Ez Download.
y
y Non-standard photo/image file may not be displayed.
y
30
Installation Menu (V 3.0)
LG Hotel Mode Setup
TV manager
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
Welcome Video
S/W : 02.00.00.01 Micom : 0.00.84
and
Insert Image
Insert Image
Mode
Slide Time
Previous
OK
buttons and then press the OK button.
Enable
◄ ►
Full
5
OK