Replacing Cartridges - Philips HQ7743/17 User Manual

EnglisH

2 2
1 1
3 Slide the cartridge with the pump into the
shaver. It only fits properly if the white side of
the pump is pointing upwards.
4 Close the cover (you will hear a click).
 Press the yellow pump button a few times
until the NIVEA FOR MEN shaving gel/lotion
appears. The shaver is now ready for use.

Replacing cartridges

Do not throw the pump away when you replace
an empty cartridge. You will need it for the other
cartridges.
1 Press the release button and open the cover of
the cartridge compartment.
2 Remove the empty cartridge and pull out the
pump.
3 Push the pump into a new cartridge until it
locks into position with a click.
4 Slide the cartridge with the pump into the
shaver. It only fits properly if the white side of
the pump is pointing upwards. Close the cover.
Storing cartridges
You can conveniently store the other cartridges
,
by attaching them to the wall holder supplied.
The holder has suction caps which allow you to
attach it to the wall easily. In this way you always
have the cartridges close at hand, which is very
convenient, especially when you shave in the
shower.