Weight Band Setting For Auto. Transmission; Appendix 1 Rs-232 Full Duplex Format - Excell H4 Series User Manual

EXCELL PRECISION CO., LTD.

3-3-8 Weight Band Setting for Auto. Transmission

Press key and enter parameter 00~99. Then press
MC
Default Setting: 05 (External value "5d")
00  External value "0d"
01  External value "1d"
99  External value "99d"
 rs1 08 must be used with rs1 07. After data has been sent once and the weight is not
removed, to send data again, please keep adding weight until "rs1 07 zero band setting" +
"rs1 08 weight band setting".
 rS1 08 is effective only when rS1 05 set to 02 (Auto. transmission)

Appendix 1 RS-232 Full Duplex Format

Table 1 Command Format
Command Format A
Host Command
Slave
MZ Return to zero
MT Tare
AT Current net weight accumulation & count plus 1 DT Clear off accumulated data and counts
SC Set continuous transmission mode
SM Set manual transmission mode
UA Shift to first unit
% Cease continuous transmission mode and enter into command mode
Command Format B
Host Command
Slave
RW Read current displaying weight
RG Read gross weight
RN Read net weight
RH Read gross weight (simple)
RU Read unit weight (simple)
RC Read accumulated counts (simple) Rl
Rf Read pre-set name (ITEM)
Rg Read ID#
RQ Read quantity (simple)
Re Read PLU#
 Add % before italic and magnified letter to read continuously.
Add # before italic and magnified letter to read stable value only.
 Two formats (AB) mentioned above are all RS-232 full duplex. If the slave terminal receives the below-listed
messages, it represents Error condition.
E1: Wrong command E2: Wrong format (wrong parameter) E3: Mismatch proceeding condition
 If read PLU command, PUL of N group is NULL or unit weight is re-entered, otherwise read PUL command
03005XXX/03006XXX
MC
Command
CP Clear off pre-tare value
CT Clear off tare value
SA Set automatic transmission mode.
SO Set command mode
UB Shift to second unit
Data
RB Read current displaying weight(simple)
RT Read tare
RI Read net weight (simple)
RE Read pre-tare (simple)
RD Read accumulated quantity (simple)
Read tare (simple)
Rk Read accumulated weight (simple accumulation format)
Rh Read weighing unit
Ri Read unit weight unit
25
key to save the setting.
ZSME200000060