Chapter 32: Replacing The Power Button With Fingerprint Reader; Procedure; Post-Requisites - Dell Inspiron 13 5000 Service Manual

Replacing the power button with fingerprint
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint reader.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Using the alignment posts, align and place the power button with fingerprint reader on the palm-rest and keyboard assembly.
2. Replace the screw (M2x3) that secures the power button with fingerprint reader to the palm-rest and keyboard assembly.
Post-requisites
1. Replace the I/O board.
2. Replace the wireless card.
3. Replace the solid-state drive.
4. Replace the base cover
computer. After working inside your computer, follow the instructions in
Replacing the power button with fingerprint reader
32
reader
After
www.dell.com/
51