Chapter 45: Removing The Display Cable; Prerequisites; Procedure - Dell Inspiron 13 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the wireless card.
3. Remove the display assembly.
4. Remove the display bezel.
5. Remove the display panel.
6. Remove the display hinges.
Procedure
1. Disconnect the camera cable from the camera module.
2. Peel off the adhesive tape that secures the camera cable to the display back-cover and antenna assembly.
3. Note the display cable routing and remove the cable from the routing guides on the display back-cover and antenna
assembly.
4. Remove the display cable from the display back-cover and antenna assembly.
68 Removing the display cable
Removing the display cable
computer. After working inside your computer, follow the instructions in
45
After
www.dell.com/