Table of Contents
Advertisement
Replacing the power button with fingerprint
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Procedure
Steps
1. Connect the power-button cable to the system board
2. Place the power button with fingerprint reader into the slot on the palm-rest and keyboard assembly.
3. Adhere the power-button cable on the palm-rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
Replacing the power button with fingerprint reader
39
reader
After working
www.dell.com/
89
Advertisement
Table of Contents
