NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the fan with the screw holes on the system board.
2. Replace the two screws (M2x5) securing the fan to the system board.
3. Connect the fan cable to the system board.
Post-requisites
Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
Replacing the fan
Replacing the fan
14
After
www.dell.com/
27